Electric automobile
Electric motorcycle
Electric bicycle
Electric scooter
Size
3000 × 2440 × 2788 mm (length × width × height)
CONTe-GO
CONTe-GO is a standard-sized, easy-to-transport, industrial grade premium container with electric vehicle chargers (with Type2 connectors) installed on three vertical walls, so the charging container can charge three EVs at the same time. The system can also charge electric bicycles and electric scooters (using the additional connectors found on the lower portion of the charging wall). In addition, the 1 Suko double plug socket provides the possibility to connect additional smaller charging adapters (e.g., electric motorcycle).
Manufactured in 2023, CONTe-GO is the result of exemplary collaboration by three industry trailblazers. It is a mobile and modular device that can be placed at any location, and can be safely put into operation in minutes when connected to the provisional electrical power grid.
The professional quality system installed in the container manages the energy regulation and the protection necessary for safe and optimal charging.
AC 22 kW
maximum power output
3 ×
simultaneous EV charging capacity
3 ×
Type 2 EV charging connectors
1 ×
Suko double plug socket
Product benefits
Mobile Infrastructure
In today’s dynamic world where the workplace can be in various and, above all, non-permanent locations, there is a real need for a specialized solution for charging e-vehicles (e.g., construction industry, event industry, container cities).
3 EVs can charge simultaneously
CONTe-GO can be surrounded by cars on three sides, and the cars can be conveniently connected to the chargers installed on the container wall – under the rain cover. (A standard 20-foot unit that will be able to simultaneously charge 5 cars is currently under development.)
Premium Quality
Top quality, long-term reliability, scalable design.
Real-time data
If desired, the container administrator can – through ALTE-GO’s IT system – view in real-time the operation of the chargers currently in use and each charging transaction (though license plate or RFID identification), and can prepare statement reports accordingly.
Economical
Sustainable operation, cost efficiency.
Standard 10′ container
Lumina charging device
CONTe-GO is equipped with iF Design Award 2022 winner Lumina chargers.
The charging devices – in addition to their attractive exterior – are capable of delivering up to 22kW of power, and it is also possible (in parallel with electric vehicles) to charge electric scooters and bicycles on the charger’s second connector.
By communicating with each other, the charging devices can optimally distribute the electricity capacity available on site between the vehicles, thereby ensuring the maximum charging speed.
It can be set so that charging is available to anyone (Plug&Charge) or charging can only be started with an RFID identifier.
If required, the chargers can be connected to the IT system of ALTE-GO, so that the utilization of the chargers can be monitored, the charging report can be obtained, and payment and accounting can be ensured using a mobile application.
Technical specifications
Partners
CN10 Standard container design, production:
Continest Factory, Continest Technologies Zrt.
Lumina charging device,
exclusive distributor and manufacturer: ALTE-GO Kft.
Electrical design and installation:
HOTTA Green Energy Kft.
